Energy Saver - Gas Saver Energy Saver LPG Saver CNG Saver Gas LPG Saver Magnetics Gas Saver Magnetics Fuel Saver Home Cooking Saver SVI Fuel Saver SVI Gas Saver Gas Pipe Saver Gas burner Gas Saving Device Industrial Gas Saver Save Energy LPG Stove Brass Body Gas Saver ISI Gas Saver Fuel Saver Device Gas Saving Tips

Fuel Saver - Gas Saver,Fuel Saver, Energy Saver, LPG Saver, CNG Saver, Gas LPG Saver, Magnetics Gas Saver, Magnetics Fuel Saver, LPG Gas Saver, Cooking Gas Saver, Gas Savers

Manufacturer of Gas Saver / Fuel Saver

CE Certified Products

An ISO-9001:2008 Company

Testing / Approval Certificates

As the world population continues to grow and the economy continues to expand, the consumption rate of energy resources will continuously increase all over the world. This is one of the measure encouragements that S. VAGADIA INNOVATIVES has for developing this new technology to help for healthy environment, to save energy and economy

INSTALLATION OF SVI COMMERCIAL GAS SAVER

» Make sure all burner knobs / taps are on off position.
» Switch off gas supply valve to stove / burner.
» Note that SVI gas saver should be kept away from direct heat or flames.
» Secure female end of gas saver onto the male end of the stove / burner.
» Secure male end of the gas saver in to the gas connection supply end. Use standard Teflon tape for sealing.
» Use spanners for proper fitting at all ends. Double check the fittings.
» Switch on the gas supply.
» Ensure that there is no gas leakage. To make sure, check all the fitting ends by applying soap water solution. If
bubbles occur then it’s not securely fitted.
» Congratulations! You have successfully installed your SVI gas saver, which can save up to 25% gas.

Note:
Install STRICTLY as per the instructions provided.
Do NOT use the gas saver in case of any gas leakage is noticed after the installation.